Products

ArusNavi

Navigation tracker

ARNAVI 5

Maximum functionality at the minimum price. Designed for the remote monitoring of moving objects, with the option to operate with two monitoring servers.

To order
See more
Maximum functionality
Low price
Integration additional equipment available

Detailed description

Maximum functionality at the minimum price. Arnavi 5 navigation controller is designed for the remote monitoring of moving objects, with the option to operate with two monitoring servers, and can be used in conjunction with any compatible software package.

Supported data transfer protocols to the server:
Arnavi(INTERNAL) – our open protocol, available for integration.
EGTS – Era Glonass Telematics Standard.

To ensure enhanced control over the condition of the vehicle or the equipment installed on the vehicle, the device can be connected with discrete (on/off), analogue, and pulse-frequency sensors (fuel consumption, passenger availability, temperature, and other sensors).

Connection of digital sensors via RS232, RS485 and 1-WIRE interfaces is envisaged.

Four programmable ‘open drain’ outputs allow for remote control of systems such as autostart or engine lock.

Internal support of the CAN bus according to the standard J1939 Protocol is implemented. It is also possible to connect an external CAN module via RS232 or RS485 interfaces. More than 20 parameters are read: total fuel consumption and level, total mileage, operating time, engine rpm speed and temperature, speed, axle loads, accident controllers, etc.

The built-in backup battery ensures the autonomous operation of the device when the vehicle battery goes off with alerting about this event. This feature is widely used for security and anti-theft purposes.

The built-in motion (acceleration) sensor is used in intelligent energy-saving algorithms and can also be used to determine the vehicle parking places.

The tracker can record the level of the GSM signal, identify base stations and the accuracy of navigation data at the moment of recording each coordinate point.

The firmware update feature without disassembling from the facility and without the need for direct access to the device (via GSM) is available.

The housing is made of plastic in accordance with the requirements of European electrical and fire safety standards.

The tracker can operate in the temperature range from -40 to +80 degrees Celsius (storage temperature of up to -45 to +85 degrees Celsius) and is suitable for installation on passenger vehicles with 12 V in-vehicle network, heavy vehicles with 24 V in-vehicle network as well as on any other vehicles.

The permissible voltage is 7 to 44 V. There is protection against reverse polarity, short- term voltage surges of no more than 300V and also protection of the built-in battery from overcharging.

Show all description

Specifications

Dimensions, mm 74х69х22
Weight, gram 250
Analog input, units 2
Digital input, units 6
Operating temperature range, ° C -40 ... +80
RS232 Interface yes
RS485 Interface yes
Discrete output 4
CAN Interface yes
1-WIRE Interface yes
Case tamper detector optional
USB host yes
SIM card slots 2
SIM chip slots 2
MicroSD slots yes
Loud speaker mode connectivity yes
Backup battery, mA 380-1100
Show all options
Navigation tracker

ARNAVI
INTEGRAL 3

The utmost easy installation due to built- in antennas.

To order
See more
Compact size
Ease of installation
Built-in antennas increase vandal resistance

Detailed description

Integral-3 is an ergonomic, economical and easy-to-use tracker that attracts users with its compactness and reliability. Despite its small size, Integral-3 has built-in navigation and GSM antennas. This fact determines the ease of installation of the device.

The main advantage of this device is the presence on Board the built-in digital interfaces RS-485 or RS-232 (depending on version) and 1-WIRE. This allows the customer to connect different equipment, depending on the customer's needs (different sensors, external CAN-module, Camera VC0607, ZM Camera, iDataLink, StartCan, etc.).

The device can work with two servers and different protocols, including EGTS

The ability to use the battery makes the tracker protected from unexpected power failures, preventing unwanted data loss, as well as provides offline operation. Built-in motion sensor (acceleration) is used in intelligent energy saving algorithms, and can also be used to determine the Parking places of the vehicle. The device is equipped with a slot for SIM-card "nano" format, SIM-chip (optional) and has a non-volatile memory of 32 MB.

Show all description

Specifications

Dimensions 70 х 53 х 22 mm
Supply voltage 8 - 40 V
Weight 52 g
Analog input 1 pcs.
Discrete input 3 pcs.
Discrete output 2 pcs.
Operating temperature range -40 ... +80 °C
RS232 interface yes
RS485 interface yes
1-WIRE interface yes
USB interface yes
Number of SIM card slots 1
Number of slots SIM chip 1
Non-volatile memory 32 Mb
Battery 100-1000 mAh
Show all options
Navigation tracker

AVTOOKO24

Navigation controller for remote monitoring of moving objects can be used in conjunction with any compatible software.

To order
See more
Easy to install
Does not require pre-sale preparation and configuration
Available to start and block the engine

Detailed description

A navigation terminal for personal use, developed on the basis of the controller "ARNAVI INTEGRAL" 3.

There are no functional differences between these devices. Tracker "AVTOOKO24" differs only special firmware, which implements algorithms to calculate the possible evacuation or theft. In addition, this device has the ability to connect the remote engine startup unit (immobilizer crawler) and the car preheating system.

One of the important fundamental differences of this terminal is the lack of its connection to the web-version of the software, only to the specialized mobile application "Avtooko24" with automatic creation of accounts, objects, billing and the ability to pay by card directly from the application.

This is a fundamentally new solution in the market of satellite monitoring, adapted for use by individuals - car owners, which, thanks to its loyal pricing policy is a good competition to satellite car alarms with autorun.

Show all description

Specifications

Dimensions 70 х 53 х 22 mm
Supply voltage 8 - 40 V
Weight 52 g
Analog input 1 pcs.
Discrete input 3 pcs.
Discrete output 2 pcs.
Operating temperature range -40 ... +80 °C
RS232 interface yes
RS485 interface yes
1-WIRE interface yes
USB interface yes
Number of SIM card slots 1
Number of slots SIM chip 1
Non-volatile memory 32 Mb
Battery 100-1000 mAh
Show all options
Fuel level sensor

ARNAVI
FLS LS-2DF

It is designed to measure the level of fuel in tanks on motor transport, railway transport, fuel warehouses, conversion of the measured level into volume.

To order
See more
The length (1m) is perfectly suitable for 95% of equipment
Low price
Suitable for harsh operating conditions

Detailed description

Fuel gaude unit "Arnavi LS-2DF" is one of the most effective tools for monitoring fuel consumption. Distinctive features of the sensor: versatility, convenience and reliability. There is a built-in temperature sensor and two active output signals: digital RS485 and frequency output, which operate simultaneously and in parallel, i.e. you can make connections on two channels.

Sensor supports Omnicomm LLS Protocol (via digital interface), which allows to use the sensor in any transport monitoring systems.

The main tasks facing the specialists of our company in the design of a new fuel level sensor were to ensure high reliability and accuracy of measurement.

Show all description

Specifications

Input voltage 8 V to 40 V
Current consumption for 12V up to 20mA for 24V up to 10mA
Built-in galvanic isolation yes
Digital output protection yes
Polarity reversal protection yes
Voltage overload protection yes
Frequency output brace yes to the positive of the device activated in the settings menu
Outputs RS-485 (all in one fuel level unit) frequency indicator of low level of fuel (option)
Integrated temperature sensor yes
Error measurement < 0,5%
Operating temperature range, ° C -45 ... +80
Lenght of measuring part from 20 to 250 cm
Software upgrade yes
Show all options
Reader

ARNAVI
CAN

It is designed to measure the level of fuel in tanks on motor transport, railway transport, fuel warehouses, conversion of the measured level into the volume.

To order
See more
Possible to add any vehicle to the list of supported
Compatible with any trackers
Suitable for all types of equipment

Detailed description

External device for reading information from the onboard computer of the vehicle, installed with the navigation controllers from all manufacturers.

Suitable for reading the basic parameters (engine hours, fuel consumption, mileage, etc.), and for specialized (axle load, turn signals, seat belts). This device has two of the most popular digital interfaces RS-232 and RS-485, which increases the range of compatible equipment.

ARNAVI CAN is suitable for any type of equipment (from cars to special equipment), all models of cars were supported by the integration of protocols of different vehicles, which increases the accuracy of the transmitted information and the list of read parameters.

Now there is a list of more than 300 cars already available to install and can be added by request.

Show all description

Specifications

Overall dimensions, mm (excluding antenna and harness) 55 х 50 х 22.5
Power supply, V 9 .. 40
Protection against overvoltage, V 55
Protection against power reversal yes
Protection against impulse voltage surges, V 600
Maximum current consumption, mA 60
Operating temperature -40ºC ... 80ºC
CAN interface 2 channels
K-Line interface optional
RS232 interface protocol CANlog/DTACAN
 RS485 interface protocol DTACAN
USB interface protocol DTACAN
Number of discrete inputs 1
Number of analog inputs 1
Number of discrete outputs 2
Show all options
Universal setup device

ARNAVI
UNU

A device for connecting PC to a fuel level sensor.

To order
See more
Low price
Maximum efficiency in work
No external power required

Detailed description

The universal device for setting the fuel level sensors with digital interface RS-485 and RS - 232.

Suitable with any sensors with connectors Molex and DELPHI connectors series FCI (PCO/PLO)

The main advantage is that there is no need for external power.

UNU "ARNAVI" is a reliable and trustworthy device despite its low price.

Show all description

Specifications

Output voltage 12 V
Digital output protection yes
Overload protection yes
UART interface yes
RS232 interface yes
USB interface yes
Show all options

Resources

Temperature measurement sensor

ARNAVI
Temperature

Designed for long-term control of temperature from -55 to +125 °C.

To order
See more

Detailed description

Сonnects via the 1-wire interface to any navigation terminals. The device has very tiny size and easy to install.

Show all description

Specifications

Power supply range 3v…5,5v
Overvoltage protection No
Reverse polarity protection No
Operation temperature From -55ºC to + 125ºC
Digital interface 1-wire
Show all options
Arnavi WiFi Module

ARNAVI
wi-fi

External device to exchange data via the WIFI connection where there is no coverage of mobile operators.

To order
See more
Suitable with any trackers
Has no analogues
Designed for using in harsh conditions

Detailed description

The equipment is designed in such a way that you can enter the login and password of the wi-fi network, if there is a connection to this network, the module will connect and unload the accumulated messages from the tracker to the monitoring server.

this solution may be relevant for vehicles that operate in areas where the coverage of mobile operators is weak.

Тhe Board is based on A6501 module (ESP8266), which has ultra low power consumption, provides connectivity of user devices to the Internet network via WIFI and supports various di erentantennas with PCB and IPEX - interfaces.

IO2 - is designed to increase the number of digital inputs via the negative side of the device. This functionality can be met in special projects that require a greater number of inputs for connecting various sensors.

There are two versions of the Board: two inputs (IO-2) IN6, IN7 - support only the discrete mode, four inputs (IO-4)IN4, IN5, IN6, IN7 - support only the discrete mode (compatible only with ARNAVI 4.1)

Show all description

Specifications

Dimensions, mm 83,5 x 57,5 x 24
Supply voltage, V 7 - 32
Over-voltage protection, V 55
Reverse polarity protection yes
Surge protection, V 600
Peak current consumption at a voltage of 12V, mA 100
Working temperature from -40ºC to + 85ºC
On/off input yes
WiFi-standart 802.11 b/g/n, Wi-Fi 2.4 GHz, support WPA/WPA2
External wifi antenna connector SMA
Interface RS232 Yes
Show all options
Wireless blocking relay

ARNAVI
PLC

Designed for the equipment of any security systems by an additional circuit of blocking of the engine operated on regular wiring of the car.

To order
See more
Impossible to find
Automatically activated in case of unauthorized teardown
Code scanning smart protection

Detailed description

Consists of a blocking wireless relay and control module. Designed for the equipment of any security systems by an additional chain of blocking of the engine using regular wiring of the car.

The device has no analogues on the market. Since the has neither Bluetooth nor radio channels for connecting between "master part" and lock relay, it is almost undetectable by scanners and increases the anti-theft ability of the security complex.

The device has small size and does not require wiring from the tracker to the relay. In addition, the blocking relay constantly checks the presence of a connection with the "control part" located in the tracker, and in case of loss of communication relay breaks the circuit automatically. Available for use on all types of vehicles powered by on-Board mains with a grounded negative battery output with a rated voltage of +12V.

Show all description

Specifications

Dimensions of PLC, mm (Without harness)  64x 23.5x 15 
Overall dimensions of the control module, mm 32x 27.5x 4 
Weight of the blocking relay, gram 15 
Weight of control module, grams 2.5 
Supply voltage, V 7 -15 
Control module current consumption, mA ≤ 5 
Maximum switching current blocking relay, A 20 
Working temperature  от -40ºC до + 85ºC 
Response time of the blocking relay, seconds ≤ 3 
Response time of blocking relay in case of loss of communication, seconds ≤ 30 
Show all options
Interlock relay

Interlock
relay

Device for breaking the power circuit (Petrol PUMP or ignition).

To order
See more

Detailed description

The kit consists of a lock relay and chips with wires. The five-pin relay connects to the output of any navigation controller. The operation occurs after the command is sent to the server, or an SMS-command. Max. load 30A.

Show all description

Specifications

Specifications not specified
Show all options
Camera

Jiahe
camera

Camera with automatic backlight function for night operating. The device is compatible with the navigation controller from any manufacturer.

To order
See more
Night mode
Compact size
Automatic shooting at specified time intervals

Detailed description

The resolution range of photos from 160x120 to 640x480. The device is compatible with navigation controllers of any manufacturer that support the digital RS-232 interface. The device is placed in a dustproof and waterproof box with a degree of protection IP67.

The camera has an automatic mode with adjustable periodicity of images (for example, every 10 minutes), as well as a manual request for photos.

Show all description

Specifications

Resolution 640х480 / 320х240 / 160х120
Image sensor 1/4''
Output RS232
Working voltage 5.0V
Operating current LED OFF 90 mA
Operating current LED ON 300 mA
Infrared LED 12 pieces
Focal lenght 3.6 mm
Viewing angle 110
Waterproof level IP67
Relative humidity 20% ~ 80% R. H
Operating temperature -20 ~ +70
Show all options
antenna set

antennas
GLONASS/GSM

Replaceble antenna kit (GSM+GPS/GLONASS) for navigation controllers with external antennas with FAKRA connector.

To order
See more

Detailed description

Replaceble antenna kit (GSM+GPS/GLONASS) for navigation controllers with external antennas with FAKRA connector.

It is used to capture satellites (determination of coordinates) and stable registration in the GSM network for further data transmission from the tracker to the monitoring server.

Show all description

Specifications

Specifications not specified
Show all options
connector with wires

connectors
24 Рins

Replaceable set of wires for connecting "ARNAVI" navigation controllers to the onboard vehicle network.

To order
See more

Detailed description

There some wires for the connecting to the external equipment to the trackers.

8 pins option is available for ARNAVI INTEGRAL and 24 pins option is for ARNAVI 5.

Show all description

Specifications

Specifications not specified
Show all options
CONNECTORS WITH WIRES

CONNECTORS
8 Рins

Replaceable set of wires for connecting "ARNAVI" navigation controllers to the onboard vehicle network.

To order
See more

Detailed description

There some wires for the connecting to the external equipment to the trackers.

8 pins option is available for ARNAVI INTEGRAL and 24 pins option is for ARNAVI 5.

Show all description

Specifications

Specifications not specified
Show all options
backup battery

battery
250 mA

Replaceable battery for autonomous operation of the device.

To order
See more

Detailed description

Battery life depends on the capacity of the battery (the greater the capacity, the longer the life without external power).

250mA, 400mA, 900mA, 1200mA capacity of the batteries are available.

Show all description

Specifications

Specifications not specified
Show all options
backup battery

battery
400 mA

Replaceable battery for autonomous operation of the device.

To order
See more

Detailed description

Battery life depends on the capacity of the battery (the greater the capacity, the longer the life without external power).

250mA, 400mA, 900mA, 1200mA capacity of the batteries are available.

Show all description

Specifications

Specifications not specified
Show all options
backup battery

battery
900 mA

Replaceable battery for autonomous operation of the device.

To order
See more

Detailed description

Battery life depends on the capacity of the battery (the greater the capacity, the longer the life without external power).

250mA, 400mA, 900mA, 1200mA capacity of the batteries are available.

Show all description

Specifications

Specifications not specified
Show all options
backup battery

battery
1200 mA

Replaceable battery for autonomous operation of the device.

To order
See more

Detailed description

Battery life depends on the capacity of the battery (the greater the capacity, the longer the life without external power).

250mA, 400mA, 900mA, 1200mA capacity of the batteries are available.

Show all description

Specifications

Specifications not specified
Show all options
Alarm button

Alarm
button

Alarm button

Microphone

Microphone
Ritmix

External device for the car audio controlling or voice communication with the driver.

To order
See more

Detailed description

External device for the car audio controlling or voice communication with the driver.

The device does not require external power for connection, it is connected to the navigation terminal to the audio input (in "ARNAVI 5" - MN / MP).

Show all description

Specifications

Frequency range 50-16000 Hz
Cable length 1,8m
Directional pattern  Omnidirectional
Show all options
mounting cable for FLS

cable
assembly

Replaceable set of wires to connect the fuel level sensor to the navigation controller.